|
|
| Home > Products > HC/P7 |
| |
| HC/P7 Range |
| |
|
|
|
HC 4
|
Ratings:
Industrial (Class H)
210 kVA - 380 kVA ( 50 HZ) |
| |
| Special Features |
| Optional Permanent Magnet Generator (PMG) system provides constant excitations under all conditions. |
Output winding: 12 wire reconnectable. |
| Optional accessories available for easy paralleling with mains or other generators. |
Poles : 4
Speed :1500 or 1800 RPM |
| Standard 2/3 pitch windings avoid excessive neutral currents. |
Bearings: Single/Double. |
| Dynamically balanced rotors, with sealed-for-life ball bearings . |
AVRS Self Excited:
SX 440 as standard
SX 421 (Optional) |
| Simple installation and maintenance, with easy access to terminals, rotating diodes and coupling bolts. |
PMG Excited (Optional):
MX 341 or MX 321 |
| Wide range of flange adaptors and single-bearing disc couplings. |
Ratings: Industrial (Class H)
210 kVA - 380 kVA ( 50 HZ)
300kVA - 475 kVA (60 HZ) |
| Built to conform to all leading industrial and marine standards. |
|
Single Bearing Adaptor & Coupling:
Adaptors SAE 0.5/1/2
Disc Couplings SAE 11.5/14 |
|
|
| |
Ratings:
Three Phase 415 Volts, 1500 RPM, 50 HZ, 0.8 pf ( lag), self excited and self regulated, class H insulation, IP23 Enclosures, Regulation +/- 1%. |
| KVA |
FRAME |
Efficiency @ Full Load & 0.8 pf |
Gross Weight (kg) |
Input KW mech. # |
| 1 Bearing |
2 Bearing |
| 225 |
HC444C* |
93.50 % |
860 |
885 |
192.7 |
| 250 |
HC444C* |
93.00 % |
860 |
885 |
217.1 |
| 285 |
HC444D* |
93.50 % |
1950 |
950 |
244.1 |
| 300 |
HC444D* |
93.10 % |
1035 |
1030 |
257.5 |
| 320 |
HC444E* |
94.00 % |
1035 |
1030 |
272.6 |
| 350 |
HC444E* |
94.00 % |
1170 |
1160 |
299.0 |
| 380 |
HC444F* |
93.90 % |
1170 |
1160 |
324.3 |
| 400 |
HC444F* |
93.60 % |
1270 |
1263 |
341.9 |
Notes:
a) All ratings are based at 40 degrees ambient and 1000 meters altitude.
b) For other ratings and marine applications contact us.
c) Continuous development of our products entitles us to change specification details without notice.
d) # Minimum mechanical power (kw) required from Prime Mover. |
| * For single bearing machine substitute 1 and for double machine substitute 2. |
|
|
|
 |
|
HC 5 |
Ratings:
Industrial (Class H)
400 kVA - 650 kVA ( 50 HZ) |
| |
| Special Features |
| Advance automatic voltage regulator (AVR) control for trouble free operation under the most demanding conditions. |
Output winding: 12 wire reconnect able. |
| Available in single/double bearing construction. |
Poles : 4
Speed : 1500 or 1800 RPM |
| Standard 2/3 pitch windings avoid excessive neutral currents. |
Bearings: Single/Double. |
| Dynamically balanced rotors, with sealed-for-life ball bearings and single or two-bearing construction. |
AVRS Self Excited:
SX 460 as standard
SA 465 (Optional) |
| Simple installation and maintenance, with easy access to terminals, rotating diodes and coupling bolts. |
PMG Excited (Optional):
MX 341 or MX 321 |
| Wide range of flange adaptors and single-bearing disc couplings. |
Ratings: Industrial (Class H)
400 kVA - 650 kVA ( 50 HZ) |
| Built to conform to all leading industrial and marine standards. |
|
Single Bearing Adaptor & Coupling:
Adaptors SAE 2/ 3/ 4/ 5
Coupling Discs SAE 7.5/10/11.5 |
|
|
| |
Ratings:
Three Phase 415 Volts, 1500 RPM, 50 HZ, 0.8 pf ( lag), self excited and self regulated, class H insulation, IP23 Enclosures, Regulation +/- 1%. |
| KVA |
FRAME |
Efficiency @ Full Load & 0.8 pf |
Gross Weight (kg) |
Input KW mech. # |
| 1 Bearing |
2 Bearing |
| 415 |
HC544C* |
94.70 % |
1065 |
1275 |
350.6 |
| 437.5 |
HC544C* |
94.50 % |
1265 |
1275 |
370.4 |
| 475 |
HC544D* |
94.85 % |
1395 |
1395 |
400.6 |
| 500 |
HC544D* |
94.80 % |
1395 |
1395 |
421.9 |
| 520 |
HC544E* |
95.50 % |
1545 |
1535 |
435.6 |
| 550 |
HC544E* |
95.20 % |
1545 |
1535 |
462.2 |
| 600 |
HC544E* |
95.00 % |
1545 |
1535 |
505.3 |
| 625 |
HC544F* |
95.40 % |
1685 |
1690 |
524.1 |
| 650 |
HC544F* |
95.20 % |
1850 |
1841 |
546.2 |
Notes:
a) All ratings are based at 40 degrees ambient and 1000 meters altitude.
b) For other ratings and marine applications contact us.
c) Continuous development of our products entitles us to change specification details without notice.
d) # Minimum mechanical power (kw) required from Prime Mover. |
* For single bearing machine substitute 1 & for double bearing machine substitute 2. |
|
|
|
 |
|
HC 6 |
Ratings:
Industrial (Class H)
750 kVA - 1250 kVA ( 50 HZ) |
| |
| Special Features |
| Optional Permanent Magnet Generator (PMG) system provides constant excitations under all conditions. |
Output winding: 12 wire reconnectable. |
| Optional accessories available for easy paralleling with mains or other generators. |
Poles (Speed) 4 (1500 or 1800 RPM) |
| Standard 2/3 pitch windings avoid excessive neutral currents. |
Bearings: Single/Double. |
| Dynamically balanced rotors, with sealed-for-life ball bearings and single or two-bearing construction |
|
| Simple installation and maintenance, with easy access to terminals, rotating diodes and coupling bolts. |
AVR’s PMG Excited : MX 321 as standard |
| Wide range of flange adaptors and single-bearing disc couplings. |
Ratings: Industrial (Class H)
750 kVA - 1250 kVA ( 50 HZ)
850kVA - 1350 kVA (60 HZ) |
| Built to conform to all leading industrial and marine standards. |
|
Single Bearing Adaptor & Coupling:
Adapters SAE 0/.5/1
Disc Couplings SAE 14/18 |
|
|
| |
Ratings:
Three Phase 415 Volts, 1500 RPM, 50 HZ, 0.8 pf ( lag), self excited and self regulated, class H insulation, IP23 Enclosures, Regulation +/- 1%. |
| KVA |
FRAME |
Efficiency @ Full Load & 0.8 pf |
Gross Weight (kg) |
Input KW mech. # |
| 1 Bearing |
2 Bearing |
| 750 |
HC634W* |
94.60 % |
1963 |
1969 |
634.2 |
| 800 |
HC634Y* |
95.80 % |
2333 |
2335 |
668.1 |
| 910 |
HC634Y* |
95.50 % |
2616 |
2600 |
762.3 |
| 1000 |
HC634Y* |
95.40 % |
2333 |
2335 |
838.6 |
| 1250 |
HCK634Z* |
94.80 % |
2553 |
2591 |
1054.9 |
Notes:
a) All ratings are based at 40 degrees ambient and 1000 meters altitude.
b) For other ratings and marine applications contact us.
c) Continuous development of our products entitles us to change specification details without notice.
d) # Minimum mechanical power (kw) required from Prime Mover. |
* For single bearing machine substitute 1 & for double bearing machine substitute 2. |
|
|
|
 |
|
P 7 |
Ratings:
Industrial (Class H)
1260 kVA - 2200 kVA ( 50 HZ) |
| |
| Special Features |
| Optional Permanent Magnet Generator (PMG) system provides constant excitations under all conditions. |
Output winding: 12 wire reconnectable. |
| Optional accessories available for easy paralleling with mains or other generators. |
Poles (Speed) 4 (1500 or 1800 RPM) |
| Standard 2/3 pitch windings avoid excessive neutral currents. |
Bearings: Single/Double. |
| Dynamically balanced rotors, with sealed-for-life ball bearings and single or two-bearing construction. |
Provision for mounting differential CT in standard terminal box arrangement. |
| Simple installation and maintenance, with easy access to terminals, rotating diodes and coupling bolts. |
AVR’s PMG Excited: MX 321 as Standard |
| Wide range of flange adaptors and single-bearing disc couplings. |
Ratings: Industrial (Class H)
1260 kVA - 2200 kVA ( 50 HZ) |
| Built to conform to all leading industrial and marine standards. |
Round adaptor as a standard feature for easy accessibility. |
Single Bearing Adaptor & Coupling:
Adaptors SAE 0/00
Disc Couplings SAE 18/21. |
|
|
| |
Ratings:
Three Phase 415 Volts, 1500 RPM, 50 HZ, 0.8 pf ( lag), self excited and self regulated, class H Insulation, IP23 Enclosures, Regulation +/- 1%. |
| KVA |
FRAME |
Efficiency @ Full Load & 0.8 pf |
Gross Weight (kg) |
Input KW mech. # |
| 1 Bearing |
2 Bearing |
| 1260 |
P1734A* |
94.55 % |
3110 |
3060 |
1066.1 |
| 1400 |
P1734B* |
95.05 % |
2760 |
2710 |
1178.3 |
| 1550 |
P1734C* |
95.00 % |
3018 |
2967 |
1299 |
| 1900 |
P1734E* |
95.95 % |
3556 |
3506 |
1584 |
| 2080 |
P1734F* |
96.10 % |
3840 |
3807 |
1731.5 |
| 2200 |
P1734G* |
96.05 % |
4434 |
4402 |
1832.4 |
Notes:
a) All ratings are based at 40 degrees ambient and 1000 meters altitude.
b) For other ratings and marine applications contact us.
c) Continuous development of our products entitles us to change specification details without notice.
d) # Minimum mechanical power (kw) required from Prime Mover. |
* For single bearing machine substitute 1 & for double bearing machine substitute 2. |
|
| |
|
|
|
